- Home
- Products
- Crane equipment
- Jib cranes
- Special-purpose jib cranes
- Pillar jib crane double-arm and with the manual slewing KKR4
Pillar jib crane double-arm and with the manual slewing KKR4
| Name of the option | Description of the option |
| Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
| Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| Electric limit switches for the movement of hoists along the crane boom | They are used to limit the path of the electric hoist along the crane console. |
| Anchor system for fixing the crane to the foundation | This option refers to the stage of installation of the structure. Anchors are needed to attach the crane to the foundation. As a rule, we offer an anchor system for implementation on a prepared foundation. On an unprepared foundation, so-called mounting studs are used. |
| Platform and ladder for maintenance of hoists and crane components | When ordering a jib crane with a height of more than 3 meters, it is recommended to immediately provide ways of servicing the hoist, oil change and other maintenance operations. One of the options is to install a horizontal platform on the column at a human-height distance from the console and a ladder welded to the crane column leading to this platform. |
| Rigid removable/non-removable stops for limiting the angle of rotation of the boom | Rigid removable /non-removable stops for limiting the angle of rotation of the boom are used mainly for jib cranes KKR3 and KKM7 to adjust the angle of rotation of the console. They are installed on the ring that wraps around the crane column. Two rigid stops limit the angle of rotation of the boom in both directions. On wall-travelling cranes, the stops are welded to the crane boom and can provide only 1 option for the angle of rotation of the boom. |
The pillar jib crane double-arm and with the manual slewing designed for mechanization of work on lifting and moving various loads. These cranes can be used both indoors and outdoors at ambient temperatures from -20°C to +40°C (-40°C on request).
The design of the boom of this jib crane allows you to increase the working area and perform specific operations, such as moving cargo through doorways and over obstacles, as well as lifting loads in hard-to-reach places. The main part of the boom can rotate 180°, and the auxiliary part can rotate 270°.
Our company produces pillar jib crane double-arm and with the manual slewing according to TU-31 5920-006-87879481-2023 with a lifting capacity of up to 0.5 tons, a boom reach of up to 4.0 meters and a lifting height of up to 8.0 meters. The hoist in this type of crane can only be used stationary, that is, not mobile.
Кран консольный на колонне двухплечевой ККР4, особенности конструкции и эксплуатации
- Применяется для подъема и перемещения любых грузов массой до 0,5 тонн
- Монтируется на бетонный фундамент посредством опорного фланца и анкерных болтов
- Поворот стрелы ручных кранов осуществляется посредством оттяжки
- Механизмом подъема и перемещения груза является тельфер (таль)
- Подъем, опускание груза происходит вручную либо при помощи электрической передвижной тали и пульта управления
- Преимуществом кранов консольных специальных перед мостовыми кранами является удобство работы в условиях ограниченной рабочей зоны, легкость монтажа, отсутствие необходимости обеспечения подкрановыми путями
- Краны консольные двухплечевые имеют особую конструкцию, благодаря которой стрела крана может обеспечить подъем и перемещение грузов в труднодоступных местах.
Если Вы хотите купить кран консольный двухплечевой, произвести ценовой расчет данного типа крана, уточнить комплектацию или узнать информацию о дополнительных опциях — звоните в офисы продаж ООО «Грузоподъем» по телефонам, указанным на сайте.
Завод «Грузоподъем» имеет всю разрешительную документацию на производимое оборудование. Помимо изготовления самого крана наша компания осуществляет доставку и монтаж оборудования на предприятии Заказчика.
