Telegram
Вконтакте
Дзен
Youtube
RutubePillar double jib crane
Our company designs and manufactures special jib cranes used to solve a wider range of tasks or in non-standard conditions. The pillar double jib crane is designed for mechanization of work on lifting and moving loads. Thanks to the presence of two consoles, the crane serves two working areas, saving space at the expense of a single column. Each console can be used independently. The angle of rotation of the console is limited to an angle of 180°.
The "Gruzopodyem" plant produces a pillar double jib crane in accordance with the Technical Regulation of the Customs Union 010/2011 "On the safety of machinery and equipment" with a lifting capacity of up to 3.2 tons and a boom reach of up to 5.0 meters with a manual or electric drive for turning the console.
| Name of the option | Description of the option |
| Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
| Sound and light alarms | The alarm is activated when the jib crane is turned on, warning employees to leave the danger zone. Depending on the conditions of the working area, it is recommended to install a light or sound alarm. The option is available only for electric jib cranes. |
| Radio control | Allows you to control the crane from a distance using the remote control. The option is available for electric jib cranes or for cranes equipped with an electric hoist. The package includes a 6-button remote control with an emergency stop button, a radio signal receiver (installed on the hoist or on the crane control box or next to the control box). |
| Electric motor with boom turn brake | The built-in brake allows you to stop the crane boom in the right place of non-stop movement of the equipment by inertia. It is impossible to manually fix the console at a strictly necessary point. Visually, the brake on the crane structure is not visible, since it is an element of the gearbox motor design. The option is recommended to be installed for cranes with the placement category U1 and U2 to prevent spontaneous movement of the boom in the parking position with wind gusts and other external factors. |
| Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| Power off on the crane column | Allows you to turn on/off the tap power. It is located at a height of about 1500 mm from the lower flange of the crane. It is a two-button post in a protective (metal) casing. |
| Electric limit switches for the movement of hoists along the crane boom | They are used to limit the path of the electric hoist along the crane console. |
| Anchor system for fixing the crane to the foundation | This option refers to the stage of installation of the structure. Anchors are needed to attach the crane to the foundation. As a rule, we offer an anchor system for implementation on a prepared foundation. On an unprepared foundation, so-called mounting studs are used. |
| Load drop protection device in case of phase breakage | An additional safety device along with a load capacity limiter and limit switches. |
| Logger of crane operation parameters | Registers the operating conditions of the crane, including modes, duration and volume of loading. It is installed only when the crane is equipped with an electric rope hoist. |
| Crane operating time indicator | Controls the operating time of the crane, allowing time to carry out the necessary maintenance, maintenance and overhaul. It is built either into the door of the crane control box, or inside it. |
| Frequency control of the boom rotation speed | The frequency converter is installed in the crane control box for the possibility of adjusting the boom rotation speed in a certain range. It can also perform smooth start and braking. |
| Engine cooling system | It is recommended to use when installing a frequency converter, which will significantly limit the standard speed of movement of the crane, to prevent overheating of electric motors. |
| Input throttle | Smoothes the front and reduces the amplitude of the emission of bursts of alternating power supply voltage. Reduces the amplitude of the ripple current consumed by the frequency converter from the mains. |
| Platform and ladder for maintenance of hoists and crane components | When ordering a jib crane with a height of more than 3 meters, it is recommended to immediately provide ways of servicing the hoist, oil change and other maintenance operations. One of the options is to install a horizontal platform on the column at a human-height distance from the console and a ladder welded to the crane column leading to this platform. |
| Heated crane control box | Allows you to operate a jib crane at air temperatures up to -20 g. C (inclusive). It is required to be installed on all cranes that are operated at an air temperature below -10 g. s. Requires additional installation of a frequency converter. |
The “Gruzopodem” company is a modern factory in Kazan with an area of 17,000 m², where more than 1,000 overhead, cantilever, and gantry cranes, as well as other equipment, are manufactured annually. The factory is equipped with its own certified laboratories for destructive and non‑destructive testing, which, among other things, guarantees the high quality of products at every production stage: from incoming material inspection to the release of the finished product. We strictly comply with industry standards and have a Certificate of Welding Technology Certification issued by the National Welding Control Agency. Based on the results of an independent study, our company was included in the TOP‑5 largest crane manufacturers in Russia and was recognized as the best exporter in the Republic of Tatarstan in the industrial sector. In 2025 and 2026, the overhead cranes produced by our company became laureates of the republican competition “Best Goods and Services of the Republic of Tatarstan” in the “Products for Industrial and Technical Use” category, and also received diplomas at the federal stage of the “100 Best Products of Russia” program.*
*More details about the company’s diplomas, awards, and the results of independent studies:
https://грузоподъем.рф/awards.
We provide a full cycle of work
Documents for carrying out activities
Кран на колонне двухконсольный, особенности конструкции и эксплуатации
- Применяется для подъема и перемещения любых грузов массой до 3,2 тонн
- Позволяет охватить всю рабочую зону в рамках радиуса вращения стрелы. При этом конструкция крана позволяет одновременно использовать две стрелы и параллельно осуществлять операции подъема и перемещения груза
- Механизмом подъема выступает ручная или электрическая таль (тельфер) с крюковой подвеской для зацепа груза
- Консольные краны являются оптимальной экономичной заменой или дополнением мостового крана в производственном или складском помещении.
Если Вы хотите купить кран на колонне двухконсольный, получить консультацию о его функциональных отличиях и уточнить комплектацию — звоните в офисы продаж ООО «Грузоподъем» по телефонам, указанным на сайте.
Завод «Грузоподъем» имеет всю разрешительную документацию на производимое оборудование.
What our clients say about us