Telegram
Вконтакте
Дзен
Youtube
RutubeMobile crane installation MCI
Mobile crane installations MCI are designed to perform loading and unloading operations in places unsuitable for the installation of stationary lifting equipment. For example, at construction sites, in places where buildings are repaired or dismantled. To ensure the performance of short-term work, light collapsible crane installations are used. They are also called mobile cranes. Structurally, MCI are similar to gantry cranes, but they have smaller dimensions, lower load capacity and span length, while MCI are equipped with wheels, so they can move along any given trajectory.
The equipment lifts and moves a load weighing up to 5.0 tons over a short distance. There are also models of wheeled gantry cranes with a load capacity increased to 10.0 tons. They can be used both indoors and outdoors. Our factory manufactures mobile crane installations with manual and electric drive in accordance with the technical regulations of the Customs Union 010/2011 "On the safety of machinery and equipment", and also provides services for the delivery and installation of crane installations at the Customer's enterprise.
| Name of the option | Description of the option |
| Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
| Sound and light alarms | The alarm is activated when the crane is turned on, warning employees to leave the danger zone. Depending on the conditions of the working area, it is recommended to install a light or sound alarm. The option is available only for electric cranes. |
| Radio control | Allows you to control the crane from a distance using the remote control. The option is available for electric cranes or for cranes equipped with an electric hoist. The package includes a 6-button remote control with an emergency stop button, a radio signal receiver (installed on the hoist or on the crane control box or next to the control box). |
| Electric motor with brake for movement | An electric motor with a movement brake is used to fix an electric crane in a resting position. Prevents spontaneous movement under the influence of wind gusts, earthquakes and other factors. |
| Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
| Electric limit switches for the movement of hoists along the crane span | They are used to limit the path of the electric hoist along the crane span. |
| Frequency control of the crane movement | The frequency converter is installed in the crane control unit for the possibility of adjusting the speed of movement of the crane in a certain range. It can also perform smooth start and braking. |
| Engine cooling system | It is recommended to use when installing a frequency converter, which will significantly limit the standard speed of movement of the crane, to prevent overheating of electric motors. |
| Heated crane control box | Allows you to operate a crane at air temperatures up to -20 g. C (inclusive). It is required to be installed on all cranes that are operated at an air temperature below -10 g. s. Requires additional installation of a frequency converter. |
The “Gruzopodem” company is a modern factory in Kazan with an area of 17,000 m², where more than 1,000 overhead, cantilever, and gantry cranes, as well as other equipment, are manufactured annually. The factory is equipped with its own certified laboratories for destructive and non‑destructive testing, which, among other things, guarantees the high quality of products at every production stage: from incoming material inspection to the release of the finished product. We strictly comply with industry standards and have a Certificate of Welding Technology Certification issued by the National Welding Control Agency. Based on the results of an independent study, our company was included in the TOP‑5 largest crane manufacturers in Russia and was recognized as the best exporter in the Republic of Tatarstan in the industrial sector. In 2025 and 2026, the overhead cranes produced by our company became laureates of the republican competition “Best Goods and Services of the Republic of Tatarstan” in the “Products for Industrial and Technical Use” category, and also received diplomas at the federal stage of the “100 Best Products of Russia” program.*
*More details about the company’s diplomas, awards, and the results of independent studies:
https://грузоподъем.рф/awards.
Other types of equipment
We provide a full cycle of work
More than 10 000 completed projects worldwide
Documents for carrying out activities
Мобильная крановая установка МКУ, особенности конструкции и эксплуатации
- Механизмом подъема и перемещения груза является тельфер (таль), который передвигается вдоль пролета МКУ. Грузозахватным органом является крюковая подвеска, подвешенная на канатном тросе
- Широко применяется на производственных предприятиях для выполнения ремонтных, погрузочно-разгрузочных работ и других целей
- Легкая в перемещении конструкция
- Не требует установки подкрановых путей или иного дополнительного оборудования
- Предназначена для работы с грузами массой до 5,0 тонн (до 10,0 тонн по запросу).
Главной особенностью конструкции мобильных крановых установок является способ их перемещения - на колесах. Он, во многом, определяет их преимущества и функциональные характеристики. Наша компания снабжает крановые установки двумя типами колес: для передвижения по ровному бетонному полу и для перемещения по рельсам. Колеса могут быть поворотными и не поворотными. Поворотные колеса имеют стояночные тормоза, обеспечивающие установке дополнительную устойчивость при работе.
Если Вы хотите купить мобильную крановую установку МКУ, рассчитать ее стоимость, уточнить комплектацию или узнать информацию о дополнительных опциях, звоните в офисы продаж ООО «Грузоподъем» по телефонам, указанным на сайте.
Наш завод имеет всю разрешительную документацию на производимое оборудование. Также мы оказываем услуги доставки и монтажа МКУ на месте будущей эксплуатации.
What our clients say about us